• Bresle Surface Cleanness Test Set 138-2

Bresle Surface Cleanness Test Set 138-2

● The surface cleanness test group can measure the degree of surface contamination to be coated. The higher the cleanliness of the surface before construction, the more the life of the protected layer after construction can be ensured. If the cleanliness beforehand is not tested according to the standard, it will take more time and cost to re-construct or repair in the future.
● The Elcometer 138/2 is a low-cost, easy-to-use device.
● Elcometer 138/2 measures surface salt, pH, iron ions, and chloride ions.
● After the test piece is attached to the surface to be tested, the pure water is injected into the syringe with a flow of about 1.5~2cc, so that the soluble surface molecules are dissolved in the injected water, and then the injected water is sucked out, and then tested by the test paper. The precipitate in the water was sampled.
● Compliance with ISO.
Model : 138-2

● 100 tablets containing pH test pieces.
● 100 pieces of iron ion test piece.
● 40 pieces of chloride ion test strips.
● Contains 50 pieces of Bresle test strips (135A).
● With other accessories: 3 sets of syringes (including needles), 30cc plastic beakers.
● Complies with ISO 8502-6.
● The surface cleanness test group can measure the degree of surface contamination to be coated. The higher the cleanliness of the surface before construction, the more the life of the protected layer after construction can be ensured. If the cleanliness beforehand is not tested according to the standard, it will take more time and cost to re-construct or repair in the future.
● The Elcometer 138/2 is a low-cost, easy-to-use device.
● Elcometer 138/2 measures surface salt, pH, iron ions, and chloride ions.
● After the test piece is attached to the surface to be tested, the pure water is injected into the syringe with a flow of about 1.5~2cc, so that the soluble surface molecules are dissolved in the injected water, and then the injected water is sucked out, and then tested by the test paper. The precipitate in the water was sampled.
● Compliance with ISO.

Related Products

Chloride sulfate nitride test group 134

Chloride sulfate nitride test group 134

Salt contamination tester 130

Salt contamination tester 130

Bresle Finishing Patch 135A

Bresle Finishing Patch 135A

© 2019 TWOSOME TRADING CORP. All rights reserved.