● The chloride ion analyzer is easy to use.
● Provide on-site quick testing.
● Compliance with ISO, BS.

● The chloride, sulfate, and nitride test groups are pre-adjusted to give the correct results.
● Results are expressed directly in PPM without complex calculations.
● Compliance with ISO, NACE, SSPC.

The Elcometer 121 is designed to measure the thickness of a single or multi-layer coating.
● This measurement method is not affected by the substrate, regardless of whether the substrate is wood, plastic, metal, or concrete.
● There are two types of general and advanced models. They are equipped with a 50x microscope with scales. The advanced model has a built-in rotatable tool holder. It can hold three different angle cutters and a hundred test blades.
●The whole machine is made of aluminum alloy anode hardened film, which is light in weight but strong and durable.
●LED light source, saving power and high brightness.

● Easy to use dry film thickness gauge.
● The bottom end of the thickness gauge has a set of reference planes in the center, and the difference between the plane and the substrate read by the probe is the film thickness.
● The wet film is to first zero the thickness gauge and then pull the center probe to the highest. When the probe touches the surface of the wet film from top to bottom, the wet film thickness is read.
● Comply with ASTM, ISO, BS, NF.

● Easy to use dry and wet film thickness gauge.
● The bottom end of the thickness gauge has a set of reference planes in the center, and the difference between the plane and the substrate read by the probe is the film thickness.
● Comply with ASTM, ISO, BS, NF.

● Quick and ergonomic lacquer film layer thickness gauge.
● Easy to hold the handle.
● Built-in blade storage space.
● 50 times magnifying glass.
● Comply with ASTM, BS EN, ISO.

● Easy to operate interface
● Suitable for solid coatings and powders
● Flat or curved surfaces are measurable

● Easy to operate interface
● Suitable for solid coatings and powders
● Flat or curved surfaces are measurable

● The non-contact dry film thickness gauge measures the thickness measurement of the dry powder without contact with the test object.
● Suitable for metal substrates with flat surfaces and curved surfaces.
● Use the ultrasonic principle to measure the value.

● The dry powder film comb is used to measure the thickness measurement of the coating of the dry powder.
● Measure the thickness before the powder is dry to avoid excessive powder coating to reduce the defect rate.

● Mobile phone operation film thickness gauge.
● Ergonomic curved shape.
● It can be connected to a computer or PDA wirelessly via USB or Bluetooth. When the computer software or PDA is measured, it will record and report at the same time.
● The host has statistical analysis memory.
● Three levels are available.
● The model is divided into two types: magnetic (F) and non-magnetic (NF).
● The only film thickness gauge in the world that meets the requirements of the International Maritime Organization (IMO) for PSPC coating.
● LED backlight, LCD screen, automatic rotation screen.
● IP64 waterproof and dustproof.
● Complies with ASTM, ISO, BS, EN, DIN.

● Mobile phone operation film thickness gauge.
● Ergonomic curved shape.
● It can be connected to a computer or PDA wirelessly via USB or Bluetooth. When the computer software or PDA is measured, it will record and report at the same time.
● The host has statistical analysis memory.
● Three levels are available.
● The model is divided into two types: magnetic (F) and non-magnetic (NF).
● The only film thickness gauge in the world that meets the requirements of the International Maritime Organization (IMO) for PSPC coating.
● LED backlight, LCD screen, automatic rotation screen.
● IP64 waterproof and dustproof.
● Complies with ASTM, ISO, BS, EN, DIN.